Ntagios, M. , Nassar, H. and Dahiya, R. (2023) Closed-loop direct ink extruder system with in-situ mixing of multi-part materials. Additive Manufacturing, (Accepted for Publication)

Citoni, B., Ansari, S. , Abbasi, Q. H. , Imran, M. A. and Hussain, S. (2022) Comparative analysis of an urban LoRaWAN deployment: real world vs. simulation. IEEE Sensors Journal, 22(17), pp. 17216-17223. (doi: 10.1109/JSEN.2022.3193504)

Ntagios, M. and Dahiya, R. (2022) 3D printed soft and flexible insole with intrinsic pressure sensing capability. IEEE Sensors Journal, (doi: 10.1109/JSEN.2022.3179233) (Early Online Publication)

Citoni, B., Ansari, S. , Abbasi, Q. H. , Imran, M. A. and Hussain, S. (2021) Comparative analysis of discrete time simulations and stochastic geometry models of a single gateway LoRaWAN network. In: IEEE SmartIoT 2021, 13-15 Aug 2021, pp. 8-12. ISBN 9781665445115 (doi: 10.1109/SmartIoT52359.2021.00011)

Citoni, B., Ansari, S. , Abbasi, Q. H. , Imran, M. A. and Hussain, S. (2021) Impact of inter-gateway distance on LoRaWAN performance. Electronics, 10(18), 2197. (doi: 10.3390/electronics10182197)

Millar, M.-A., Yu, Z. , Burnside, N. , Jones, G. and Elrick, B. (2021) Identification of key performance indicators and complimentary load profiles for 5th generation district energy networks. Applied Energy, 291, 116672. (doi: 10.1016/j.apenergy.2021.116672)

Nikbakhtnasrabadi, F., El Matbouly, H., Ntagios, M. and Dahiya, R. (2021) Textile based stretchable microstrip antenna with intrinsic strain sensing. ACS Applied Electronic Materials, 3, pp. 2233-2246. (doi: 10.1021/acsaelm.1c00179)

MacLaren, I. et al. (2020) A comparison of a direct electron detector and a high-speed video camera for a scanning precession electron diffraction phase and orientation mapping. Microscopy and Microanalysis, 26(6), pp. 1110-1116. (doi: 10.1017/S1431927620024411) (PMID:32867871)

Millar, M. , Elrick, B., Jones, G., Yu, Z. and Burnside, N. M. (2020) Roadblocks to low temperature district heating. Energies, 13(22), 5893. (doi: 10.3390/en13225893)

Ntagios, M. , Escobedo, P. and Dahiya, R. (2020) 3D Printed Robotic Hand with Embedded Touch Sensors. In: IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS 2020), Manchester, UK, 16-19 Aug 2020, ISBN 9781728152783 (doi: 10.1109/FLEPS49123.2020.9239587)

Ntagios, M. , Escobedo, P. and Dahiya, R. (2020) 3D Printed Packaging of Photovoltaic Cells for Energy Autonomous Embedded Sensors. In: IEEE Sensors 2020, 25-28 Oct 2020, ISBN 9781728168012 (doi: 10.1109/SENSORS47125.2020.9278635)

Citoni, B., Fioranelli, F. , Imran, M. A. and Abbasi, Q. (2019) Internet of things and LoRaWAN enabled future smart farming. IEEE Internet of Things Journal, 2(4), pp. 14-19. (doi: 10.1109/IOTM.0001.1900043)

Williams, R., Barbera, D., Docherty, M., Bray, S. and McBride, A. (2019) Computational modelling of inertia friction welding. Proceedings in Applied Mathematics and Mechanics, 19(1), e201900500. (doi: 10.1002/pamm.201900500)

Millar, M. A. , Burnside, N. and Yu, Z. (2019) An investigation into the limitations of low temperature district heating on traditional tenement buildings in Scotland. Energies, 12(13), 2603. (doi: 10.3390/en12132603)

Millar, M. A. , Burnside, N. M. and Yu, Z. (2019) District heating challenges for the UK. Energies, 12(2), 310. (doi: 10.3390/en12020310)