Fully angularly resolved 3D microrheology with optical tweezers

Matheson, A. B., Mendonca, T., Smith, M. G., Sutcliffe, B., Fernandez, A. J., Paterson, L., Dalgarno, P. A., Wright, A. J. and Tassieri, M. (2024) Fully angularly resolved 3D microrheology with optical tweezers. Rheologica Acta, 63, pp. 205-217. (doi: 10.1007/s00397-024-01435-1) (PMID:38440195) (PMCID:PMC10908627)

[img] Text
316565.pdf - Published Version
Available under License Creative Commons Attribution.

2MB

Abstract

Microrheology with optical tweezers (MOT) is an all-optical technique that allows the user to investigate a materials’ viscoelastic properties at microscopic scales, and is particularly useful for those materials that feature complex microstructures, such as biological samples. MOT is increasingly being employed alongside 3D imaging systems and particle tracking methods to generate maps showing not only how properties may vary between different points in a sample but also how at a single point the viscoelastic properties may vary with direction. However, due to the diffraction limited shape of focussed beams, optical traps are inherently anisotropic in 3D. This can result in a significant overestimation of the fluids’ viscosity in certain directions. As such, the rheological properties can only be accurately probed along directions parallel or perpendicular to the axis of trap beam propagation. In this work, a new analytical method is demonstrated to overcome this potential artefact. This is achieved by performing principal component analysis on 3D MOT data to characterise the trap, and then identify the frequency range over which trap anisotropy influences the data. This approach is initially applied to simulated data for a Newtonian fluid where the trap anisotropy induced maximum error in viscosity is reduced from ~ 150% to less than 6%. The effectiveness of the method is corroborated by experimental MOT measurements performed with water and gelatine solutions, thus confirming that the microrheology of a fluid can be extracted reliably across a wide frequency range and in any arbitrary direction. This work opens the door to fully spatially and angularly resolved 3D mapping of the rheological properties of soft materials over a broad frequency range.

Item Type:Articles
Additional Information:The authors acknowledge support from the Technology Touching Life initiative through an EPSRC/BBSRC/MRC joint grant “Experiencing the micro-world—a cell’s perspective” (EP/R035067/1, EP/R035563/1, and EP/R035156/1) http://nu-sense.ac.uk/home.aspx.
Status:Published
Refereed:Yes
Glasgow Author(s) Enlighten ID:Smith, Matthew and Tassieri, Dr Manlio and Fernandez, Ms Andrea Jannina
Authors: Matheson, A. B., Mendonca, T., Smith, M. G., Sutcliffe, B., Fernandez, A. J., Paterson, L., Dalgarno, P. A., Wright, A. J., and Tassieri, M.
College/School:College of Science and Engineering > School of Engineering
College of Science and Engineering > School of Engineering > Biomedical Engineering
Journal Name:Rheologica Acta
Publisher:Springer
ISSN:0035-4511
ISSN (Online):1435-1528
Published Online:08 February 2024
Copyright Holders:Copyright: © The Author(s) 2024
First Published:First published in Rheologica Acta 63: 205–217
Publisher Policy:Reproduced under a Creative Commons licence

University Staff: Request a correction | Enlighten Editors: Update this record

Project CodeAward NoProject NamePrincipal InvestigatorFunder's NameFunder RefLead Dept
301441Experiencing the micro-world - a cell's perspectiveManlio TassieriEngineering and Physical Sciences Research Council (EPSRC)EP/R035067/1ENG - Biomedical Engineering