Liu, Y., Hafezi, M. and Feeney, A. (2024) A cascaded Nitinol Langevin transducer for resonance stability at elevated temperatures. Ultrasonics, 137, 107201. (doi: 10.1016/j.ultras.2023.107201)
![[img]](https://eprints.gla.ac.uk/style/images/fileicons/text.png) |
Text
309247.pdf - Published Version Available under License Creative Commons Attribution. 2MB |
Abstract
Across power ultrasonics and sensing, piezoelectric ultrasonic transducers commonly experience degradation in mechanical, electrical, and dynamic performance due to the relatively high sensitivity of piezoelectric materials to changes in temperature. These changes, arising for example through high excitation voltages or environmental conditions, can lead to nonlinear dynamic behaviours which compromise device performance. To overcome this, the excitation signal to the piezoelectric material is often pulsed, mitigating the influence of temperature rises. However, there remain constraints on suitable candidate piezoelectric materials for power ultrasonic devices. As a novel approach to mitigating the influence of temperature on the properties of piezoelectric materials, the phase-transforming shape memory alloy Nitinol is incorporated into the piezoelectric stack of a Langevin power ultrasonic transducer, in a cascade formation. The underlying principle is that the nonlinear hardening response of Nitinol to rising temperature can be used to dynamically compensate for the nonlinear softening of the piezoelectric materials. Thus, the dynamic response of the transducer can be linearised at elevated excitation levels. In this study, two configurations of Langevin transducer are designed and characterised. One transducer incorporates a Nitinol middle mass, and in the second, titanium. A combination of electrical and thermomechanical characterisation is undertaken, where it is demonstrated that the nonlinear softening of the piezoelectric stack can be mitigated through control of the Nitinol microstructure. The vibration amplitudes of the Nitinol-middle cascaded transducer are higher and more stable when the Nitinol is austenite rather than a combination of martensite and austenite at room temperature. It has also been shown that the vibration amplitude and resonance frequency of Nitinol-middle cascaded transducer remain stable as temperature changes from 20 °C to 45 °C, dependent of the excitation voltage. Moreover, the self-heating experiment demonstrates the resonance stability of the Nitinol-middle cascaded transducer for continuous operation.
| Item Type: | Articles |
|---|---|
| Status: | Published |
| Refereed: | Yes |
| Glasgow Author(s) Enlighten ID: | Feeney, Dr Andrew and Liu, Mr Yuchen and Hafezi, Dr Mahshid |
| Authors: | Liu, Y., Hafezi, M., and Feeney, A. |
| College/School: | College of Science and Engineering > School of Engineering > Systems Power and Energy |
| Journal Name: | Ultrasonics |
| Publisher: | Elsevier |
| ISSN: | 0041-624X |
| ISSN (Online): | 1874-9968 |
| Published Online: | 10 November 2023 |
| Copyright Holders: | Copyright © 2023 The Authors |
| First Published: | First published in Ultrasonics 137: 107201 |
| Publisher Policy: | Reproduced under a Creative Commons License |
University Staff: Request a correction | Enlighten Editors: Update this record
Funder and Project Information
Funder and Project Information