Anisotropic gypsum scaling of corrugated polyvinylidene fluoride hydrophobic membrane in direct contact membrane distillation

Hu, J., Bazargan Harandi, H., Chen, Y., Zhang, L., Yin, H. and He, T. (2023) Anisotropic gypsum scaling of corrugated polyvinylidene fluoride hydrophobic membrane in direct contact membrane distillation. Water Research, 244, 120513. (doi: 10.1016/j.watres.2023.120513) (PMID:37651864)

[img] Text
305400.pdf - Accepted Version
Restricted to Repository staff only until 1 October 2025.
Available under License Creative Commons Attribution Non-commercial No Derivatives.

2MB

Abstract

Membrane distillation (MD) technology has gained a lot of attention for treatment of geothermal brine, high salinity waste streams. However, mineral scaling remains a major challenge when treating complex high-salt brines. The development of surface-patterned superhydrophobic membranes is one of the core strategies to solve this problem. We prepared flat sheet membranes (F-PVDF) and hydrophobic membranes with micron-scale corrugated pattern (C-PVDF) using a phase separation method. Their scaling behavior was systematically evaluated using calcium sulfate solutions and the impact of the feed flow was innovatively investigated. Although C-PVDF shows higher contact angle and lower sliding angle than F-PVDF, the scaling resistance of C-PVDF in the perpendicular flow direction has worst scaling resistance. Although the nucleation barrier of the corrugated membrane is the same at both parallel and perpendicular flow directions based on the traditional thermodynamic nucleation theory, experimental observations show that the C-PVDF has the best scaling resistance in the parallel flow direction. A 3D computational fluid dynamics (CFD) model was used and the hydrodynamic state of the pattern membranes was assessed as a determinant of the scaling resistance. The corrugated membrane with parallel flow mode (flow direction in parallel to the corrugation ridge) induces higher fluid velocity within the channel, which mitigated the deposition of crystals. While in the perpendicular flow mode (flow direction in perpendicular to the corrugation ridge), the solutions confined in the corrugated grooves due to vortex shielding, which aggravates the scaling. These results shed light on the mechanism of scaling resistance of corrugated membranes from a hydrodynamic perspective and reveal the mechanism of anisotropy exhibited by corrugated membranes in MD.

Item Type:Articles
Additional Information:The research was supported by the National Natural Science Foundation of China [Nos. 21978315, 52011530031].
Status:Published
Refereed:Yes
Glasgow Author(s) Enlighten ID:Chen, Mr Yecang and He, Mr Tao and Yin, Professor Huabing
Authors: Hu, J., Bazargan Harandi, H., Chen, Y., Zhang, L., Yin, H., and He, T.
College/School:College of Science and Engineering > School of Engineering
College of Science and Engineering > School of Engineering > Biomedical Engineering
Journal Name:Water Research
Publisher:Elsevier
ISSN:0043-1354
ISSN (Online):1879-2448
Copyright Holders:Copyright: © 2023 Elsevier Ltd.
First Published:First published in Water Research 244: 120513
Publisher Policy:Reproduced in accordance with the publisher copyright policy

University Staff: Request a correction | Enlighten Editors: Update this record