Formamidinium lead halide perovskite nanocomposite scintillators

Braddock, I. H. B., Al Sid Cheikh, M., Ghosh, J., Mulholland, R. E., O’Neill, J. G., Stolojan, V., Crean, C., Sweeney, S. J. and Sellin, P. J. (2022) Formamidinium lead halide perovskite nanocomposite scintillators. Nanomaterials, 12(13), 2141. (doi: 10.3390/nano12132141)

Abstract

While there is great demand for effective, affordable radiation detectors in various applications, many commonly used scintillators have major drawbacks. Conventional inorganic scintillators have a fixed emission wavelength and require expensive, high-temperature synthesis; plastic scintillators, while fast, inexpensive, and robust, have low atomic numbers, limiting their X-ray stopping power. Formamidinium lead halide perovskite nanocrystals show promise as scintillators due to their high X-ray attenuation coefficient and bright luminescence. Here, we used a room-temperature, solution-growth method to produce mixed-halide FAPbX3 (X = Cl, Br) nanocrystals with emission wavelengths that can be varied between 403 and 531 nm via adjustments to the halide ratio. The substitution of bromine for increasing amounts of chlorine resulted in violet emission with faster lifetimes, while larger proportions of bromine resulted in green emission with increased luminescence intensity. By loading FAPbBr3 nanocrystals into a PVT-based plastic scintillator matrix, we produced 1 mm-thick nanocomposite scintillators, which have brighter luminescence than the PVT-based plastic scintillator alone. While nanocomposites such as these are often opaque due to optical scattering from aggregates of the nanoparticles, we used a surface modification technique to improve transmission through the composites. A composite of FAPbBr3 nanocrystals encapsulated in inert PMMA produced even stronger luminescence, with intensity 3.8× greater than a comparative FAPbBr3 /plastic scintillator composite. However, the luminescence decay time of the FAPbBr3 /PMMA composite was more than 3× slower than that of the FAPbBr3 /plastic scintillator composite. We also demonstrate the potential of these lead halide perovskite nanocomposite scintillators for low-cost X-ray imaging applications.

• Item Type: Articles
• Status: Published
• Refereed: Yes
• Glasgow Author(s) Enlighten ID: Sweeney, Professor Stephen
• Authors: Braddock, I. H. B., Al Sid Cheikh, M., Ghosh, J., Mulholland, R. E., O’Neill, J. G., Stolojan, V., Crean, C., Sweeney, S. J., and Sellin, P. J.
• College/School: College of Science and Engineering > School of Engineering > Electronics and Nanoscale Engineering
• Journal Name: Nanomaterials
• Publisher: MDPI
• ISSN: 2079-4991
• ISSN (Online): 2079-4991
• Published Online: 22 June 2022
• Copyright Holders: Copyright © 2022 The Authors
• First Published: First published in Nanomaterials 12(13): 2141
• Publisher Policy: Reproduced under a Creative Commons License