Lam, K.H. , Chan, H.L.W., Choy, C.L., Luo, H.S., Yin, Q.R. and Yin, Z.W. (2004) Properties of PMN-PT fibres fabricated using powder of PMN-PT single crystals. Ceramics International, 30(7), pp. 1939-1943. (doi: 10.1016/j.ceramint.2003.12.189)
Full text not currently available from Enlighten.
Abstract
Lead magnesium niobate–lead titanate (PMN–PT) ceramic fibres with the nominal composition of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 were synthesised using PMN–PT single crystal powder and poly(acrylic acid). The fibres were extruded directly by pressing the mixture through a spinneret. The fibres were well crystallised after sintering at 1250 °C and the final diameter was around 300 μm. The microstructural properties of the fibres were investigated using scanning electron microscopy (SEM) and X-ray diffraction (XRD). The electrical characteristics of the fibre were determined by measuring the hysteresis D–E loop, relative permittivity and impedance spectrum. The measured results showed that this method can be used to fabricate PMN–PT fibres with good performance.
| Item Type: | Articles |
|---|---|
| Status: | Published |
| Refereed: | Yes |
| Glasgow Author(s) Enlighten ID: | Lam, Dr Koko |
| Authors: | Lam, K.H., Chan, H.L.W., Choy, C.L., Luo, H.S., Yin, Q.R., and Yin, Z.W. |
| College/School: | College of Science and Engineering > School of Engineering > Systems Power and Energy |
| Journal Name: | Ceramics International |
| Publisher: | Elsevier |
| ISSN: | 0272-8842 |
| ISSN (Online): | 1873-3956 |
| Related URLs: |
University Staff: Request a correction | Enlighten Editors: Update this record
Deposit and Record Details
Deposit and Record Details