Enhanced dielectric permittivity in surface-modified graphene/PVDF composites prepared by an electrospinning-hot pressing method

Lin, B., Li, Z.-T., Yang, Y., Li, Y., Lin, J.-C., Zheng, X.-M., He, F.-A. and Lam, K. H. (2019) Enhanced dielectric permittivity in surface-modified graphene/PVDF composites prepared by an electrospinning-hot pressing method. Composites Science and Technology, 172, pp. 58-65. (doi: 10.1016/j.compscitech.2019.01.003)

Full text not currently available from Enlighten.

Abstract

In the present work, the surface-modified graphene (SMG)/poly(vinylidene fluoride) (PVDF) fibrous membranes obtained from the electrospinning were treated by the hot pressing in the laminating mode to form the SMG/PVDF composites. The SMG was prepared by subjecting the graphene oxide to silane modification, NaBH4 reduction, and PVDF grafting in sequence. The successful surface modification of graphene was confirmed by TEM, XPS, Raman spectroscopy, FTIR, WAXD, and TGA. Furthermore, the structures of SMG/PVDF composites fabricated by the electrospinning-hot pressing method were studied by SEM, FTIR, and WAXD, which exhibited the well dispersion of SMG in the PVDF matrix. Finally, the investigation showed that the dielectric permittivities of SMG/PVDF composites increased with the SMG content, which were significantly higher than that of pristine PVDF. The dielectric permittivity of SMG (16 wt%)/PVDF composite (83.8) at 1000 Hz was found to be ten-fold that of the corresponding value of pristine PVDF (8.3) with a relatively low dielectric loss factor (0.34) and a relatively high thermal conductivity (0.679 W/mK).

Item Type:Articles
Status:Published
Refereed:Yes
Glasgow Author(s) Enlighten ID:Lam, Dr Koko
Authors: Lin, B., Li, Z.-T., Yang, Y., Li, Y., Lin, J.-C., Zheng, X.-M., He, F.-A., and Lam, K. H.
College/School:College of Science and Engineering > School of Engineering > Systems Power and Energy
Journal Name:Composites Science and Technology
Publisher:Elsevier
ISSN:0266-3538
ISSN (Online):1879-1050

University Staff: Request a correction | Enlighten Editors: Update this record