Science and curation considerations for the design of a Mars Sample Return (MSR) sample receiving facility

Carrier, B. L. et al. (2022) Science and curation considerations for the design of a Mars Sample Return (MSR) sample receiving facility. Astrobiology, 22(S1), S-217. (doi: 10.1089/ast.2021.0110)

Abstract

The most important single element of the “ground system” portion of a Mars Sample Return (MSR) Campaign is a facility referred to as the Sample Receiving Facility (SRF), which would need to be designed and equipped to receive the returned spacecraft, extract and open the sealed sample container, extract the samples from the sample tubes, and implement a set of evaluations and analyses of the samples. One of the main findings of the first MSR Sample Planning Group (MSPG, 2019a) states that “The scientific community, for reasons of scientific quality, cost, and timeliness, strongly prefers that as many sample-related investigations as possible be performed in PI-led laboratories outside containment.” There are many scientific and technical reasons for this preference, including the ability to utilize advanced and customized instrumentation that may be difficult to reproduce inside in a biocontained facility, and the ability to allow multiple science investigators in different labs to perform similar or complementary analyses to confirm the reproducibility and accuracy of results. It is also reasonable to assume that there will be a desire for the SRF to be as efficient and economical as possible, while still enabling the objectives of MSR to be achieved. For these reasons, MSPG concluded, and MSPG2 agrees, that the SRF should be designed to accommodate only those analytical activities that could not reasonably be done in outside laboratories because they are time- or sterilization-sensitive, are necessary for the Sample Safety Assessment Protocol (SSAP), or are necessary parts of the initial sample characterization process that would allow subsamples to be effectively allocated for investigation. All of this must be accommodated in an SRF, while preserving the scientific value of the samples through maintenance of strict environmental and contamination control standards.

• Item Type: Articles
• Status: Published
• Refereed: Yes
• Glasgow Author(s) Enlighten ID: Smith, Dr Caroline
• Authors: Carrier, B. L., Beaty, D. W., Hutzler, A., Smith, A. L., Kminek, G., Meyer, M. A., Haltigin, T., Hays, L. E., Agee, C. B., Busemann, H., Cavalazzi, B., Cockell, C. S., Debaille, V., Glavin, D. P., Grady, M. M., Hauber, E., Marty, B., McCubbin, F. M., Pratt, L. M., Regberg, A. B., Smith, C. L., Summons, R. E., Swindle, T. D., Tait, K. T., Tosca, N. J., Udry, A., Usui, T., Velbel, M. A., Wadhwa, M., Westall, F., and Zorzano, M.-P.
• College/School: College of Science and Engineering > School of Geographical and Earth Sciences
• Journal Name: Astrobiology
• Publisher: Mary Ann Liebert
• ISSN: 1531-1074
• ISSN (Online): 1557-8070
• Published Online: 14 December 2021
• Copyright Holders: Copyright © Mary Ann Liebert, Inc.
• First Published: First published in Astrobiology 22(S1): S217-S237
• Publisher Policy: Reproduced under a Creative Commons Licence