A new design for friction stir spot joining of Al alloys and carbon fibre reinforced composites

Amir, B., Fotouhi, M. and William, M. (2020) A new design for friction stir spot joining of Al alloys and carbon fibre reinforced composites. Journal of Materials Engineering and Performance, 29, pp. 4913-4921. (doi: 10.1007/s11665-020-04998-1)

Abstract

Friction stir spot welding (FSSW) has been recently developed to join dissimilar materials. However, the traditional requirement for a rotating tool consists of a pin and shoulder in FSSW leads to a complex joining process and unpredictable defects. In this study, a new static-shoulder design in FSSW was proposed and developed to join Al alloys to carbon fiber-reinforced polymer (CFRP) composites. The main joining parameters, including pin rotational speed, pin feed rate and pin plunge depth, were varied to investigate their effects on the joining temperature, materials interaction and the strength of joints. The pin rotational speed had the largest influence on the joining temperature. Lap shear tensile testing was conducted to evaluate the performance of the joints. The joints exhibited the ultimate lap shear force from 230 to 260 N. A brittle fracture occurred with the displacement-at-fracture load of 0.35-0.41 mm. Cross-sectional images revealed the creation of undulations on the surface of Al alloys in the joining zone. The undulations created a macro-mechanical interlocking bonding between the materials, which determined the performance of the joints. For a flat pin, by increasing the plunge depth from 1.25 to 1.30 mm, the undulation size increased from 0.21 to 0.26 mm, which can enhance the macro-mechanical interlocking bonding between Al alloys and CFRP and accordingly increased the ultimate shear force of the joints from 230 to 241 N. Use of a fluted pin significantly influenced the flow of the plasticized Al alloy which created pronounced undulations and large Al alloy spikes of 0.46 mm. These features seemed to establish an efficient macro-mechanical interlocking bonding, which resulted in a noticeable improvement in the performance of the joint. For a plunge depth of 1.30 mm, the ultimate shear force increased to 261 N using the fluted pin.

• Item Type: Articles
• Status: Published
• Refereed: Yes
• Glasgow Author(s) Enlighten ID: Fotouhi, Dr Mohammad
• Authors: Amir, B., Fotouhi, M., and William, M.
• College/School: College of Science and Engineering > School of Engineering > Autonomous Systems and Connectivity
• Journal Name: Journal of Materials Engineering and Performance
• Publisher: Springer
• ISSN: 1059-9495
• ISSN (Online): 1544-1024
• Published Online: 03 August 2020
• Copyright Holders: Copyright © The Author(s) 2020
• First Published: First published in Journal of Materials Engineering and Performance 29:4913–4921
• Publisher Policy: Reproduced under a Creative Commons license