Li, W., Paul, M.C. , Baig, H., Siviter, J., Montecucco, A., Mallick, T.K. and Knox, A.R. (2019) A three-point-based electrical model and its application in a photovoltaic thermal hybrid roof-top system with crossed compound parabolic concentrator. Renewable Energy, 130, pp. 400-415. (doi: 10.1016/j.renene.2018.06.021)

Sweet, T.K.N. et al. (2018) Design and characterization of hybrid III-V Concentrator Photovoltaic–Thermoelectric receivers under primary and secondary optical elements. Applied Energy, 226, pp. 772-783. (doi: 10.1016/j.apenergy.2018.06.018)

Han, G. et al. (2018) Topotactic anion-exchange in thermoelectric nanostructured layered tin chalcogenides with reduced selenium content. Chemical Science, 9(15), pp. 3828-3836. (doi: 10.1039/c7sc05190e) (PMID:29780515) (PMCID:PMC5939836)

Baig, H. et al. (2018) Conceptual design and performance evaluation of a hybrid concentrating photovoltaic system in preparation for energy. Energy, 147, pp. 547-560. (doi: 10.1016/j.energy.2017.12.127)

Selvaraj, P. et al. (2018) Enhancing the efficiency of transparent dye-sensitized solar cells using concentrated light. Solar Energy Materials and Solar Cells, 175, pp. 29-34. (doi: 10.1016/j.solmat.2017.10.006)

Sweet, T.K.N., Rolley, M.H., Li, W., Paul, M.C. , Gao, M. and Knox, A.R. (2017) Experimental characterization and multi-physics simulation of a triple-junction cell in a novel hybrid III:V concentrator photovoltaic–thermoelectric receiver design with secondary optical element. Energy Procedia, 142, pp. 809-814. (doi: 10.1016/j.egypro.2017.12.130)

Li, W. et al. (2017) A coupled optical-thermal-electrical model to predict the performance of hybrid PV/T-CCPC roof-top systems. Renewable Energy, 112, pp. 166-186. (doi: 10.1016/j.renene.2017.05.012)

Baig, H. et al. (2017) Outdoor performance of a reflective type 3D LCPV system under different climatic conditions. AIP Conference Proceedings, 1881(1), 020004. (doi: 10.1063/1.5001403)

Li, W. et al. (2017) Multiphysics simulations of thermoelectric generator modules with cold and hot blocks and effects of some factors. Case Studies in Thermal Engineering, 10, pp. 63-72. (doi: 10.1016/j.csite.2017.03.005)

Li, W., Paul, M.C. , Sellami, N., Mallick, T.K. and Knox, A.R. (2017) Natural convective heat transfer in a walled CCPC with PV cell. Case Studies in Thermal Engineering, 10, pp. 499-516. (doi: 10.1016/j.csite.2017.10.009)

Han, G. et al. (2017) Chlorine-enabled electron doping in solution-synthesised SnSe thermoelectric nanomaterials. Advanced Energy Materials, 7(13), 1602328. (doi: 10.1002/aenm.201602328)

Li, W. et al. (2017) A scaling law for monocrystalline PV/T modules with CCPC and comparison with triple junction PV cells. Applied Energy, 202, pp. 755-771. (doi: 10.1016/j.apenergy.2017.05.182)

Li, W., Baig, H., Paul, M.C. , Mallick, T.K. and Knox, A.R. (2017) A Conceptual Strategy to Control the Cell Temperature in a Concentrating Photovoltaic/Thermal Roof-top System. 13th Photovoltaic Science, Application and Technology Conference (PVSAT-13), Bangor, UK, 5-7 Apr 2017.

Han, G., Zhang, R., Popuri, S. R., Greer, H. F., Reece, M. J., Bos, J.-W. G., Zhou, W., Knox, A. R. and Gregory, D. H. (2017) Large-scale surfactant-free synthesis of p-type SnTe nanoparticles for thermoelectric applications. Materials, 10(3), 233. (doi: 10.3390/ma10030233)

Montecucco, A., Siviter, J. and Knox, A.R. (2017) Combined heat and power system for stoves with thermoelectric generators. Applied Energy, 185(Part 2), pp. 1336-1342. (doi: 10.1016/j.apenergy.2015.10.132)

Li, W., Paul, M.C. , Sellami, N., Sweet, T., Montecuccoa, A., Siviter, J., Baig, H., Gao, M., Mallick, T. and Knox, A. (2016) Six-parameter electrical model for photovoltaic cell/module with compound parabolic concentrator solar energy. Solar Energy, 137, pp. 551-563. (doi: 10.1016/j.solener.2016.08.050)

Baig, H. et al. (2016) Indoor characterization of a reflective type 3D LCPV system. AIP Conference Proceedings, 1766, 020002. (doi: 10.1063/1.4962070)

Li, W. et al. (2016) Thermal performance of two heat exchangers for thermoelectric generators. Case Studies in Thermal Engineering, 8, pp. 164-175. (doi: 10.1016/j.csite.2016.06.008)

Han, G. et al. (2016) Facile surfactant-free synthesis of p-type SnSe nanoplates with exceptional thermoelectric power factors. Angewandte Chemie (International Edition), 55(22), pp. 6433-6437. (doi: 10.1002/anie.201601420) (PMID:27094703)

Meng, X.-l. et al. (2016) A novel absorptive/reflective solar concentrator for heat and electricity generation: an optical and thermal analysis. Energy Conversion and Management, 114, pp. 142-153. (doi: 10.1016/j.enconman.2016.02.011)

Li, W., Paul, M.C. , Sweet, T., Gao, M., Mallick, T.K. and Knox, A. (2016) A Six-Parameter Model for Photovoltaic Cell/Module/Panel with Concentrator. SuperSolar Summer Technical Meeting, Bath, UK, 5-6 July 2016.

Li, W., Paul, M.C. , Sellami, N., Mallick, T.K. and Knox, A.R. (2016) Experimental and Numerical Investigation of Thermal Performance of a Crossed Compound Parabolic Concentrator with PV Cell. In: 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malaga, Spain, 11 - 13 Jul 2016,

Siviter, J., Montecucco, A. and Knox, A. (2015) Experimental application of thermoelectric devices to the Rankine cycle. Energy Procedia, 75, pp. 627-632. (doi: 10.1016/j.egypro.2015.07.472)

Li, W. et al. (2015) Multiphysics simulations of a thermoelectric generator. Energy Procedia, 75, pp. 633-638. (doi: 10.1016/j.egypro.2015.07.473)

Li, W. et al. (2015) Coupled simulation of performance of a crossed compound parabolic concentrator with solar cell. Energy Procedia, 75, pp. 325-330. (doi: 10.1016/j.egypro.2015.07.371)

Montecucco, A., Siviter, J. and Knox, A. R. (2015) Constant heat characterisation and geometrical optimisation of thermoelectric generators. Applied Energy, 149, pp. 248-258. (doi: 10.1016/j.apenergy.2015.03.120)

Li, W., Paul, M. C. , Sellami, N., Mallick, T. K. and Knox, A. R. (2015) Unsteady optical and thermal behaviour of crossed compound parabolic concentrator with solar cell. In: 11th Photovoltaic Science Application and Technology (PVSAT-11), Leeds, UK, 15-17 April 2015,

Siviter, J., Montecucco, A. and Knox, A.R. (2015) Rankine Cycle efficiency gain using thermoelectric heat pumps. Applied Energy, 140, pp. 161-170. (doi: 10.1016/j.apenergy.2014.11.075)

Montecucco, A. and Knox, A. (2015) Maximum power point tracking converter based on the open-circuit voltage method for thermoelectric generators. IEEE Transactions on Power Electronics, 30(2), pp. 828-839. (doi: 10.1109/TPEL.2014.2313294)

Mullen, P., Siviter, J., Montecucco, A. and Knox, A.R. (2015) Thermoelectric energy harvester with a cold start of 0.6 °C. Materials Today: Proceedings, 2(2), pp. 823-832. (doi: 10.1016/j.matpr.2015.05.106)

Li, W., Paul, M. C. , Siviter, J., Montecucco, A. and Knox, A. (2015) Identifying Thermal Performance of Two Heat Exchangers for Thermoelectric Generators with CFD. In: UK Heat Transfer Conference 2015, Edinburgh, UK, 7-8 Sept 2015, (Unpublished)

Montecucco, A., Siviter, J. and Knox, A. (2014) The effect of temperature mismatch on thermoelectric generators electrically connected in series and parallel. Applied Energy, 123, pp. 47-54. (doi: 10.1016/j.apenergy.2014.02.030)