Experimental validation of a microcracking-based toughening mechanism for cortical bone

Vashishth, D., Tanner, K.E. and Bonfield, W. (2003) Experimental validation of a microcracking-based toughening mechanism for cortical bone. Journal of Biomechanics, 36(1), pp. 121-124. (doi: 10.1016/S0021-9290(02)00319-6)

Abstract

It has been proposed that cortical bone derives its toughness by forming microcracks during the process of crack propagation (J. Biomech. 30 (1997) 763; J. Biomech. 33 (2000) 1169). The purpose of this study was to experimentally validate the previously proposed microcrack-based toughening mechanism in cortical bone. Crack initiation and propagation tests were conducted on cortical bone compact tension specimens obtained from the antlers of red deer. For these tests, the main fracture crack was either propagated to a predetermined crack length or was stopped immediately after initiating from the notch. The microcracks produced in both groups of specimens were counted in the same surface area of interest around and below the notch, and crack growth resistance and crack propagation velocity were analyzed. There were more microcracks in the surface area of interest in the propagation than in initiation specimens showing that the formation of microcracks continued after the initiation of a fracture crack. Crack growth resistance increased with crack extension, and crack propagation velocity vs. crack extension curves demonstrated the characteristic jump increase and decrease pattern associated with the formation of microcracks. The scanning electron micrographs of crack initiation and propagation displayed the formation of a frontal process zone and a wake, respectively. These results support the microcrack-based toughening mechanism in cortical bone. Bone toughness is, therefore, determined by its ability to form microcracks during fracture.

• Item Type: Articles
• Keywords: Cortical bone fracture; Crack growth resistance; Frontal process zone; Crack propagation velocity; Antler
• Status: Published
• Refereed: Yes
• Glasgow Author(s) Enlighten ID: Tanner, Professor Kathleen
• Authors: Vashishth, D., Tanner, K.E., and Bonfield, W.
• Subjects: R Medicine > R Medicine (General); T Technology > T Technology (General)
• College/School: College of Science and Engineering > School of Engineering > Biomedical Engineering
• Journal Name: Journal of Biomechanics
• ISSN: 0021-9290