Design and dynamics of oil filled flexural ultrasonic transducers for elevated pressures

Somerset, W. E., Feeney, A. , Kang, L., Li, Z. and Dixon, S. (2022) Design and dynamics of oil filled flexural ultrasonic transducers for elevated pressures. IEEE Sensors Journal, 22(13), pp. 12673-12680. (doi: 10.1109/JSEN.2022.3178751)

[img] Text
273769.pdf - Published Version
Available under License Creative Commons Attribution.

2MB

Abstract

The flexural ultrasonic transducer has traditionally been limited to proximity measurement applications, such as car-parking systems and industrial metrology. Principally, their classical form is unsuitable for environments above atmospheric 1 bar pressure, due to an internal air cavity which creates a pressure imbalance across the transducer’s vibrating membrane. This imbalance leads to physical deformation and degradation of the transducer’s structure, restricting the membrane’s capacity to vibrate at resonance to transmit and receive ultrasound. There is a requirement for ultrasonic sensors which can withstand environments of elevated pressure, for example in ultrasonic gas metering. Recent research demonstrated the dynamic performance of flexural ultrasonic transducers with vented structures, allowing the pressure to balance across the transducer membrane. However, a hermetically sealed transducer is a more practical and robust solution, where the internal components of the transducer, such as the piezoelectric ceramic disc, will be protected from harmful environmental fluids. In this research, the design and fabrication of a new form of flexural ultrasonic transducer for environments of elevated pressure is demonstrated, where the internal air cavity is filled with an incompressible fluid in the form of a non-volatile oil. Dynamic performance is measured through acoustic microphone measurements, electrical impedance analysis, and pulse-echo ultrasound measurement. Together with finite element analysis, stable ultrasound measurement is achieved above 200 bar in air, opening the possibility for reliable ultrasound measurement in hostile environments of elevated pressure.

Item Type:Articles
Additional Information:This work was supported by EPSRC under Grant EP/N025393/1.
Status:Published
Refereed:Yes
Glasgow Author(s) Enlighten ID:Feeney, Dr Andrew
Authors: Somerset, W. E., Feeney, A., Kang, L., Li, Z., and Dixon, S.
Subjects:T Technology > TJ Mechanical engineering and machinery
T Technology > TK Electrical engineering. Electronics Nuclear engineering
College/School:College of Science and Engineering > School of Engineering
Journal Name:IEEE Sensors Journal
Publisher:IEEE
ISSN:1530-437X
ISSN (Online):1558-1748
Published Online:06 June 2022
Copyright Holders:Copyright © 2022 IEEE
First Published:First published in IEEE Sensors Journal 22(13): 12673-12680
Publisher Policy:Reproduced under a Creative Commons Licence

University Staff: Request a correction | Enlighten Editors: Update this record