Review of technology specific degradation in crystalline silicon, cadmium telluride, copper indium gallium selenide, dye sensitised, organic and perovskite solar cells in photovoltaic modules: understanding how reliability improvements in mature technologies can enhance emerging technologies

Kettle, J. et al. (2022) Review of technology specific degradation in crystalline silicon, cadmium telluride, copper indium gallium selenide, dye sensitised, organic and perovskite solar cells in photovoltaic modules: understanding how reliability improvements in mature technologies can enhance emerging technologies. Progress in Photovoltaics, 30(12), pp. 1365-1392. (doi: 10.1002/pip.3577)

[img] Text
270389.pdf - Published Version
Available under License Creative Commons Attribution.

48MB

Abstract

A comprehensive understanding of failure modes of solar photovoltaic (PV) modules is key to extending their operational lifetime in the field. In this review, first, specific failure modes associated with mature PV technologies, such as crystalline silicon (c-Si), copper indium gallium selenide (CIGS) and cadmium telluride (CdTe), are framed by sources of specific failure modes, their development from the early-developmental stages onwards and their impact upon long term performance of PV modules. These failure modes are sorted by both PV technology and location of occurrence in PV modules, such as substrate, encapsulant, front and rear electrode, absorber and interlayers. The second part of the review is focused on emerging PV technologies, such as perovskites solar cells, dye sensitised and organic PVs, where due to their low to medium technology readiness levels, specific long-term degradation mechanisms have not fully emerged, and most mechanisms are only partially understood. However, an in-depth summary of the known stability challenges associated with each emerging PV technology is presented. Finally, in this paper, lessons learned from mature PV technologies are reviewed, and considerations are given in to how these might be applied to the further development of emerging technologies. Namely, any emerging PV technology must eventually pass industry-standard qualification tests, while warranties for the lifetime of modern c-Si-based modules might be extended beyond the existing warranted life of 25 years.

Item Type:Articles
Status:Published
Refereed:Yes
Glasgow Author(s) Enlighten ID:Kettle, Professor Jeff
Authors: Kettle, J., Aghaei, M., Ahmad, S., Fairbrother, A., Irvine, S., Jacobsson, J. J., Kazim, S., Kazukauskas, V., Lamb, D., Lobato, K., Mousdis, G. A., Oreski, G., Reinders, A., Schmitz, J., Yilmaz, P., and Theelen, M. J.
College/School:College of Science and Engineering > School of Engineering > Electronics and Nanoscale Engineering
Journal Name:Progress in Photovoltaics
Publisher:Wiley
ISSN:1062-7995
ISSN (Online):1099-159X
Published Online:15 June 2022
Copyright Holders:Copyright © 2022 The Authors
First Published:First published in Progress in Photovoltaics 30(12): 1365-1392
Publisher Policy:Reproduced under a Creative Commons License

University Staff: Request a correction | Enlighten Editors: Update this record