Open-source, high-throughput ultrasound treatment chamber

Yddal, T., Cochran, S. , Gilja, O. H., Postema, M. and Kotopoulis, S. (2014) Open-source, high-throughput ultrasound treatment chamber. Biomedical Engineering / Biomedizinische Technik, 60(1), pp. 77-87. (doi: 10.1515/bmt-2014-0046) (PMID:25367613)

Abstract

Studying the effects of ultrasound on biological cells requires extensive knowledge of both the physical ultrasound and cellular biology. Translating knowledge between these fields can be complicated and time consuming. With the vast range of ultrasonic equipment available, nearly every research group uses different or unique devices. Hence, recreating the experimental conditions and results may be expensive or difficult. For this reason, we have developed devices to combat the common problems seen in state-of-the-art biomedical ultrasound research. In this paper, we present the design, fabrication, and characterisation of an open-source device that is easy to manufacture, allows for parallel sample sonication, and is highly reproducible, with complete acoustic calibration. This device is designed to act as a template for sample sonication experiments. We demonstrate the fabrication technique for devices designed to sonicate 24-well plates and OptiCell™ using three-dimensional (3D) printing and low-cost consumables. We increased the pressure output by electrical impedance matching of the transducers using transmission line transformers, resulting in an increase by a factor of 3.15. The devices cost approximately €220 in consumables, with a major portion attributed to the 3D printing, and can be fabricated in approximately 8 working hours. Our results show that, if our protocol is followed, the mean acoustic output between devices has a variance of <1%. We openly provide the 3D files and operation software allowing any laboratory to fabricate and use these devices at minimal cost and without substantial prior know-how

• Item Type: Articles
• Status: Published
• Refereed: Yes
• Glasgow Author(s) Enlighten ID: Cochran, Professor Sandy
• Authors: Yddal, T., Cochran, S., Gilja, O. H., Postema, M., and Kotopoulis, S.
• College/School: College of Science and Engineering > School of Engineering > Systems Power and Energy
• Journal Name: Biomedical Engineering / Biomedizinische Technik
• Publisher: De Gruyter
• ISSN: 0013-5585
• ISSN (Online): 1862-278X
• Published Online: 04 November 2014